[Elecraft] [K2] - KDSP2 Installation Clearances

[Lyle Johnson]

> I am in the process of installing the KDSP2 on the Control Board.  When the
> KDSP2 is plugged into J1 and J2 the connectors do not fully mate;
The spacer/hardware stackup should be determining the spacing.  The 
KDSP2 (not DSP) PC board has no component leads or other protrusions 
where it sits over the tall components on the control board, as the 
clearance is very, small.

73,

Lyle KK7P