[Elecraft] K3: Recording from LIN OUT

Hector Padron ad4c2008 at yahoo.com
Tue Jul 20 18:44:01 EDT 2010


Hi Pete,since I purchased my K3 I am doing recordings taking the audio off the line out conector at the rear and setting  the menu LIN OUT at "nor 005" with this settings I have perfect clear low level audio to inject to my Dell laptop line input and all my recordings are very good,they are an identical copy of the sender; with this configuration I can record myself as well when I have the monitor engaged and set to 20 on the menu..The playback is done also from the computer line out to the K3 rear line in conector and then setting the quick menu to "FP.L" 
For reference I am using the latest 4.03 FW version and a Yamaha CM-500 for mic.
Good luck with yours,73
 
AD4C
 


"If you see a driver handling a cell phone on her/his hands while driving,do please stay away from that vehicle,its a moving bomb.Your life is at danger.Keep yourself and your family alive"

--- On Tue, 7/20/10, Peter <pc2a at pi4cc.nl> wrote:


From: Peter <pc2a at pi4cc.nl>
Subject: Re: [Elecraft] K3: Recording from LIN OUT
To: "Elecraft List" <elecraft at mailman.qth.net>
Date: Tuesday, July 20, 2010, 2:50 PM


Pete Smith schreef:
> I have been doing some more experiments with recording from the LIN OUT 
> jack, and have now managed to get decent results with fixed LIN OUT 
> levels as low as 50, without running all the sound card mixers quite at 
> maximum. Sound seems OK, so maybe that part is good.
>
> My original objective in pursuing this whole thing was to make contest 
> recordings that contained both my CW (or voice) and the other station's 
> signal.  According to the manual, doing so requires that LIN OUT be set 
> to =PHONES, but I have found that even at a fixed LIN OUT level my 
> sidetone can be heard in my recordings, although at a very low level.  
> Is this simply bleedthrough, or has there been a change in the firmware 
> that is not reflected in the manual?
>
>   
I have asked Wayne (and he passed this to Lyle) on 28-feb to make the TX 
audio (and CW side tone) as fixed audio to the line out.
This regardless to the monitor setting. Just to make a complete 
recording of a contest possible.
There are in "the consider" stage

Peter
PC2A
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



      


More information about the Elecraft mailing list