[Elecraft] K2 KAT2 Issues/Questions

[Don Wilhelm]

Paul,

Not quite enough information yet to give you a positive answer.
Are you using the KAT2 in the ATU CAL menu setting?  If not, what do you 
have connected to the ANT jack(s) - hopefully a dummy load.  If it is 
other than a dummy load, what happens with a dummy load attached?
Did you obtain a good null when you balanced the KAT2 wattmeter?  If 
not, that is the starting point, even if that is not the problem source.

73,
Don W3FPR

Paul Locker wrote:
> I have just finished the installation of my kat2 I got at Dayton.  I am seeing a 
> high current warning for any band I use above 2 watts.  I tried the other 
> antenna position and noticed it resulted in a different swr.  I changed my 
> ground and that didn't improve the high current warning as I read in the manual 
> that it could be an issue.  
>
>
> Is there anything specific I need to check or do to start my troubleshooting?
>
> Paul
> k4pml
>
>
>  "Don't forget to take the right Path"
>
>  -JRDL
>
>
>
>       
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>