[Elecraft] K3 SSB & Data - No Output, Need suggestions

[Jim / W6JHB]

Been using my K3 number 4359 on CW for almost a month - very happy. Last
night I hooked up my SignaLink USB and tried PSK31. Got a waterfall display,
signals present and being decoded, but NO output when CocoaModem set to
transmit. Figured I had something hosed in the SL jumpers - checked three
times, they are OK. So, hooked up my Elecraft MH2 Mic and thought I'd give
SSB a try this afternoon. NO OUTPUT!

I have the K3 set on 14.200 (dummy load), RF power at 40w, Mic Sel = FP.L,
Mic + Lin = OFF. I press the PTT button on the mic, I get the red TX light
on the K3, the radio appears to go into transmit mode, but no inkling of RF
when I speak into the mic. I have the Mic control at 23, CMP = 0, Mon = 53.

So, what have I forgotten to set? I'm betting that whatever is hosed with
the SSB setting may fix my PSK31 problem, too. Anyone have any suggestions?

Tnx, Jim / W6JHB


-- 
View this message in context: http://elecraft.365791.n2.nabble.com/K3-SSB-Data-No-Output-Need-suggestions-tp5278730p5278730.html
Sent from the Elecraft mailing list archive at Nabble.com.