[Elecraft] K3 Audio routing question

[W8JI Tom]

You are correct, that is not diversity mode but it has an advantage. We 
often do that on 160 meters, where my antennas have very deep wide-area 
nulls. We can lock one ear one direction and move the other ear to other 
directions to scan for signals.

In this mode we often use different bandwidths and sometimes even have one 
channel USB and the other LSB on CW with the USB channel offset lower in 
frequency and the LSB channel offset higher.  On SSB however it would 
obviously be same sideband and always same frequency, so I understand the 
utility in what you do.

The one thing I dislike about the K3 is the location of volume controls 
while in that mode. I would prefer a fast "balance" or fader that is easy to 
grab to instantly fade one channel out. I think this is really what you are 
asking for.

I have this feature on my antenna and audio selector panel. Easy to grab. 
Using dual audio gain controls is too cumbersome for this mode.

http://www.w8ji.com/images/Shack/RX-ant-select.jpg

73 Tom

----- Original Message ----- 
From: "g0afh" <g0afh at g0afh.com>
To: <don at w3fpr.com>; <Elecraft at mailman.qth.net>
Sent: Tuesday, July 06, 2010 4:26 AM
Subject: Re: [Elecraft] K3 Audio routing question


> Hi Don,
>
> Imagine a system with good isolation between antennae such as you can
> achieve with long yagi's at VHF/UHF. In my left ear I have the main RX
> with stations from the UK, in my right ear I have the sub RX and
> stations from Europe. I have a QRM from another G in my left ear when I
> am called by a weak station from Europe which I hear in my right ear. As
> the antennae have nice patterns I can barley hear the QRM from the G on
> the antenna pointing at Europe. Now I want to mute or attenuate the
> audio from the main RX and listen to the audio from the sub RX in both
> ears. I know this will not be diversity any more but I'd quite like the
> filter controls to continue to affect both receivers without having to
> press BSET. After I have worked the station I need to return to
> diversity mode listening to both receivers again.
>
> Diversity mode almost does what I want with both receivers locked
> together, I just need to be able to select which audio I listen to at a
> given time. I can easily make up a box to switch the audio but I would
> have thought that what I want to do is not that uncommon.
>
> Hope this makes more sense.
> 73
> Ian
> G0AFH
>
> Don Wilhelm wrote:
>> Diversity reception requires hearing both the main and the subRX, each
>> with their own antenna.
>> I do not understand why one would want to listen to only the subRX when
>> doing diversity receive - it nullifies any benefit of diversity.
>> Can you explain further, maybe there is something I am missing.
>>
>> 73,
>> Don W3FPR
>>
>> The Smiths wrote:
>>
>>> Lyle,
>>>
>>> As you know, this is NOT working in the Diversity mode as this person 
>>> wants to use it.  It is ONLY available with SUB mode at the time. 
>>> Perhaps you can Stress to Wayne that he should finally make it available 
>>> for use when in Diversity...
>>>
>>>
>>>
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html