[Elecraft] Elecraft K3 Utility

[Dick Dievendorff]

This is the sort of response you might get when you have chosen a different
COM port than the one your K3 is connected to.  The COM port you've chosen
is echoing everything sent to it.  Maybe it's a modem.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Paul Milward
Sent: Tuesday, July 06, 2010 6:11 AM
To: Elecraft Reflector
Subject: [Elecraft] Elecraft K3 Utility

Help
I'm doing something wrong...................and I don't know what it is
I cannot get the K3 Utility to upload new "versions" to the rig. I also
cannot upload macros. I was able to do both a few months ago when I first
got the rig. 

!!!news flash....I.m basically computer illiterate

I get this when I attempt to upload "versions"

08:54:08 Ready
08:54:08 K3 bootloader is ready for MCU firmware load. COM3 RS-232 speed
38400 bps
08:54:39 Sending firmware file hmcu0397.hex to MCU
08:54:39 Send MCU firmware failed at load address x0800
08:54:39 MCU firmware load failed
08:54:39 Clock "Close" to close this window

tia es 73
Paul, NU4C
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html