[Elecraft] scanning

[Bob Cunnings]

As of firmware MCU 3.25 / DSP 2.21 six meter scanning has been
available. From the release notes:

* 6 METER SCANNING NO LONGER PROHIBITED. Scanning is limited
to the 6-m U.S. ham band (50-54). Exception: In some countries the K3 won’t
operate on 6 m at all.

Bob NW8L

On Sat, Jul 3, 2010 at 3:03 PM, WILLIS COOKE <wrcooke at yahoo.com> wrote:
> Jack, you are not trying to scan on six meters are you?  Six meter scanning is blocked to comply with a FCC reg to keep people from eaves dropping on cell phone conversations.  The possibility of getting this changed has been beat to death several times in the last couple of years so I hope we don't start that again.
>  Willis 'Cookie' Cooke
> K5EWJ
>
>
>
>
> ________________________________
> From: Jack Colson <jcolson7 at tampabay.rr.com>
> To: elecraft at mailman.qth.net
> Sent: Sat, July 3, 2010 3:36:44 PM
> Subject: [Elecraft] scanning
>
> I am unable to enable the scan function.  I have stored two frequencies
> in memory locations 90 and 91.  According to the manual(version D4 page
> 40) simply depress M>V, hold scan button for 2 seconds and you will see
> AF ON.  Well holding SCAN does nothing and  do not see the AF msg nor
> SCAN.
>
> This must be simple but it eludes me.  I am running the latest F/W
> version 4.03.
>
> Any thoughts?
>
> Thank you,
> 73
> Jack, W3TMZ
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>