[Elecraft] K3 - No line out with FSK D

[Greg - AB7R]

Jim,

In FSK-D you need to make sure the PITCH setting on the K3 and the tones setup in 
the software match.  So if you have the K3 set to 2125-170 the software MUST be set 
to 2125.  If not you won't decode anything.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Fri Jul  2 12:28 , "Jim McDonald"  sent:

>I just got my K3 back from being repaired and connected it to a new PC.  I
>hope I'm overlooking something simple in the configuration because I have no
>audio output to the computer using the line out jack.  I can decode PSK31 in
>the DATA A mode and see the waterfall, but nothing with DATA D (FSK).  I
>turned the CONFIG: LIN OUT to maximum (nor 100) and even have the
>soundcard's input level to maximum.
>
>I tried PSK receive with Digipan and am trying to set up MMTTY for FSK.
>
>Hopefully it's not a rig problem.
>
>I'm happy to be told I forgot something simple, so don't be shy about
>insulting me with the obvious!  Thanks.
>
>Jim N7US
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: Elecraft at mailman.qth.net','','','')">Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html