[Elecraft] [K3] Noise blanker insertion loss

[Wes Stewart]

Correct.  You can turn blanking on with the front panel switch and go to the setup function and dial it in and out with the knob and listen for the relay click.

--- On Sun, 1/31/10, Joe Planisky <jplan at jeffnet.org> wrote:

From: Joe Planisky <jplan at jeffnet.org>
Subject: Re: [Elecraft] [K3] Noise blanker insertion loss
To: "Lyle Johnson" <kk7p at wavecable.com>
Cc: "Wes Stewart" <n7ws at yahoo.com>, elecraft at mailman.qth.net, "IIIEdward Dickinson" <softblue at windstream.net>
Date: Sunday, January 31, 2010, 6:32 PM

Nearly the same here (-2.2dB), but only when the IF NB is used.  No  
loss at all with just the DSP NB engaged.

73
--
Joe KB8AP

On Jan 31, 2010, at 4:31 PM, Lyle Johnson wrote:

>
>> I just noted that my noise blanker has an S-unit of insertion loss.
>
> I measure 2.0 dB (AGC OFF, using AFV/dBV internal functions and
> monitoring a steady nominal S5 carrier on 6 meters).
>
> 73,
>
> Lyle KK7P
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html