[Elecraft] K3: Using the MFJ-998 IntelliTuner

[Steve Ellington]

I have the MFJ-998, K3 combo. No...There is no direct interface between them 
as there is with the import rigs. The K3 doesn't provide an input that 
automatically keys the rig at low power. This is not really a problem, just 
a difference in design. With the K3, you disable it's internal tuner from 
the front panel. When you want to activate the 998, you depress the "tune" 
button on the K3. The K3 automatically outputs a preset power level, I use 
15 watts, into the 998. The 998 responds and quickly finds a match if 
possible.
The 998 has it's own "tune" button but this won't work with the K3 since as 
I said, there is no interface. Actually, I prefer using the K3's tune button 
anyway. This allows the 998 to be installed some distance from the K3, even 
at the antenna in a weather proof environment. 73
Steve
N4LQ
----- Original Message ----- 
From: "Phil Hystad" <k7peh at comcast.net>
To: "Elecraft Discussion List" <Elecraft at mailman.qth.net>
Sent: Saturday, January 30, 2010 1:46 PM
Subject: [Elecraft] K3: Using the MFJ-998 IntelliTuner


> Does anyone use an MFJ-998 IntelliTuner with their K3 that includes the 
> ATU?
>
> If so, does the K3 interface to the MFJ-998 in a supported fashion where 
> the tune button on the K3 would control the MFJ-998 instead of the 
> internal tuner.
>
> phil, K7PEH
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.733 / Virus Database: 271.1.1/2657 - Release Date: 01/30/10 
02:35:00