[Elecraft] [K3]K3 switched off after power failure

[Ed Muns]

Has the 12v Sense Mod been done?

Ed - W0YK

------Original Message------
From: Don Wilhelm
Sender: elecraft-bounces at mailman.qth.net
To: furlan at gmx.net
Cc: elecraft at mailman.qth.net
ReplyTo: don at w3fpr.com
Subject: Re: [Elecraft] [K3]K3 switched off after power failure
Sent: Jan 29, 2010 12:04

Werner,

The K3 has a Remote Power ON input on the ACC connector.  See the manual 
page 44 for how it is to be used.
You might want to add a battery at the output of the power supply 
because of the unreliable power source which will allow an orderly 
shutdown of the K3 when the mains power is interrupted.

73,
Don W3FPR

Dr. Werner Furlan wrote:
> When my K3 looses power, it will not switch on itself after power is back. 
>
> Is there a way to achieve this? 
> The question is because I am thinking of an unattended use with an 
> unreliable power source. 
>
> 73! de Werner OE9FWV
>   
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



Sent from my BlackBerry