[Elecraft] Yaesu Mics on a K3?

[W4CCS]

I use a MD-100 with my K3 with excellant results. I purchased a NCS 
Mulit-Switcher to do the task. I use the same mike on the K3, a Kenwood 
2000 and my Yeasu FT-950. This switch works great on all.

Link:  http://www.ncsradio.com/m_switch.html

No, I don't know these guys..

de W4CCS


On 1/29/2010 10:34 AM, Don Wilhelm wrote:
> Dean,
>
> The K3 is permanently wired for the Elecraft mic configuration, so you
> must either create an adapter or rewire your microphones for the
> Elecraft pinout.  If you choose to rewire the microphones, you will have
> to change your K2 as well if you wish to use the same mic on both.
>
> After answering many questions about how to set the K2 microphone
> configuration header for a wide variety of mics, I for one am glad that
> the K3 does not have a configurable mic pinout.
>
> The K3 microphone jack pinout is in the K3 manual.
>
> 73,
> Don W3FPR
>
> Dean wrote:
>    
>> All of my mics are set up for standard Yaesu hf rigs including an MD-100 and an MH-31. My K2 was set up for this configuration too.
>>
>> Is it feasible to configure the K3 to use these mics? Or do I need to change all of the mic configurations?
>>
>> Thanks!
>>
>> Dean
>>
>>
>>      
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>