[Elecraft] BNC Connectors

[Radio Amateur N5GE]

On Thu, 28 Jan 2010 12:40:43 -0600, Radio Amateur N5GE <n5ge at n5ge.com>
wrote:

Oops!

The calculation Frequency was 432MHz...

Tom, N5GE

n5ge at n5ge.com
K3 #806 with SUB RX, K3 #1055, PR6,
XV144, XV432, KRC2,
W1, 2 W2's and other small kits

1 K144XV on order

http://www.n5ge.com
http://www.swotrc.net

>On Wed, 27 Jan 2010 22:35:35 -0800, Brett Howard
><brett at livecomputers.com> wrote:
>
>Using the Times Microwave Attenuation and Power Handling Calculator
>Downloadable from: http://www.timesmicrowave.com/cable_calculators/,
>I found that RG58 standard coax has .15dB attenuation at a length of
>1.5 feet.
>
>If one were using this as a jumper between a Transverter or Rig and an
>Amplifier the loss would be acceptable, but not as a hook up from the
>amp to a feedthrough connector in the wall or something like that. The
>power handling capability of an eighteen inch piece like that is only
>130 watts.
>
>Tom, N5GE
[snip]