[Elecraft] NR adjust on sub?

[Wayne Burdick]

NR settings are per-mode, but they'll be the same for a given mode on  
each receiver. I.e., you can't (at present) have different NR settings  
for CW on main vs. CW on sub.

NR on/off is per-band/per-receiver.

This will be clarified in the next K3 manual (and before that, in the  
errata).

73,
Wayne
N6KR

>
> With Sub Rx ON, I can toggle NR ON/OFF in Sub Rx using bset. This does
> not affect the ON/OFF status of the Main Rx. However, when I change  
> the
> NR setting (press/hold NR) of the SubRx, that changes both the SubRx  
> and
> Main Rx setting... just as Werner reports below.
> 73,
> Ken K3IU
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~
> On 1/26/2010 12:52 PM, Dr. Werner Furlan wrote:
> > on my K3 with FW 3.76 loaded I can set NR settings with BSET for the
> > subreceiver, but it is then changed also for the main receiver. I  
> can use
> > NR on the main or sub or for both, but with the same NR settings  
> for the
> > same mode.
> >
> > 73! de Werner OE9FWV