[Elecraft] K3BSR

[Stan Rife]

Thanks for the help guys, but the resolution you suggested is not what I used. I was putzing around with it after I sent the email and happened to push & hold the VOX button and that seemed to reset something...I don't know exactly what happened. Maybe turning the VOX on & off unlinked the VFOs somehow. 
 
I think some strange commands got sent over the serial link while I was using K3BSR. Can't say for sure but I don't recall ever pushing the SUB button until I noticed the problem. I did turn the SUB on & off a couple of times but the VFOs still appeared to be linked.
 
It seems to be ok now, so all is well that ends well.
 
Stan Rife
W5EWA


--- On Fri, 1/22/10, Richard Ferch <ve3iay at storm.ca> wrote:


From: Richard Ferch <ve3iay at storm.ca>
Subject: Re: [Elecraft] K3BSR
To: srife at swbell.net
Date: Friday, January 22, 2010, 3:17 PM


You wrote:

> A & B VFOs are on the same frequency and are tuning together with the
> right most decimal point in the B VFO flashing. How do I get it out of this
> mode?

Your VFOs are LINKed. Hold the SUB button to unlink them.

73,
Rich VE3KI