[Elecraft] K3 ACC connector and VGA cable

[Jim McDonald]

Below is the email from the Yahoo reflector in October.  I bought a
Y-adaptor from the first source, and it worked fine for my Top Ten Devices
Band Decoder and a PR6.  It was $2.40 and was less than $5 including
shipping.

Jim N7US

-----Original Message-----
From: Joe Subich, W4TV [mailto:lists at subich.com] 
Sent: October 22, 2009 20:37
To: Elecraft_K3 at yahoogroups.com
Subject: RE: [Elecraft_K3] Top Ten Devices Band Decoder


The "elegant" solutions are the full DB15HD Y cables 
available from: 

   www.cablewholesale.com  p/n 10H1-27708
   www.altex.com Philmore 70-568 

or one of the breakout boards from: 

   http://www.winfordeng.com/products/cat_brk.php 
   the BRKSD15HDM-C is particularly interesting.  

The alternative is to make up your own cable to a 
box with a DB9 or DIN8 for "Band data" and some 
RCA/3.5 mm jacks for FSK, PTT, ALC and Inhibit.  

73, 

   ... Joe, W4TV 


-----Original Message-----



> Someone posted a link to some Y-cables here a few months back and I 
> obtained a couple, but I don't recall the vendor at the moment.

Philmore 70-568, available from several sources.

73,

Lyle KK7P