[Elecraft] K3 ACC connector and VGA cable

[Dick Dievendorff]

The standard VGA cables may omit or combine key pins. Some people have  
found Y connectors with all 15 pins connected. There is a small  
commercial device that has a 15 pin connector attached to a PC board  
with screw connectors for all 15 wires. I'm away from my PC now but  
these are discussed in the archives of this forum.

Dick, K6KR


Sent from my iPhone

On Jan 17, 2010, at 10:07 AM, Randy Hall <listk7age at gmail.com> wrote:

> Hi,
>
> I am starting to get the my K3 integrated into my station.
>
> I am thinking about building a breakout box to bring several of the  
> pins on
> the ACC connector out to RCA jacks.
>
> I was wondering if I just hack off one end of a standard VGA cable  
> if the
> cable has enough wires in it to get to all the pins on the ACC  
> connector?
> Or, get a 15 pin VGA connector and make up my own cable?
>
> Comments from the K3 community?
>
> Randy
> K7AGE
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html