[Elecraft] K3 10 Watt Version - How much actual power out?

[elecraft at astromag.co.uk]

Dean, running the driver "flat out" or indeed the PA at full power 
creates a high level of 3rd order IMD. If you run the K3 around 1/4 
power the IMD on SSB transmit reduces by around 10 dB. It's not that the 
K3 is particularly bad in this regard, almost all 12 Volt PA 
transceivers are like it. My recommendation would be to opt for the 100 
Watt PA and run into your linear at 15 ~ 25 Watts or so.

73 Dave, G4AON
K3/100 #80
===============
I presently have a K2 with 15 to 17 watts out. When I need QRO it runs 
my AL-811H amp up to a few hundred watts so I have never needed the 100 
watt finals.

I am thinking that I will be able to do the same thing with the K3 as 
long as it has about the same output.

For those with the 10 watt model, it would be helpful to know what your 
actual power out is.

Thanks!

Dean