[Elecraft] Yamaha CM500 wiring for K2?
Randy Moore
wrmoore47 at comcast.net
Fri Jan 15 12:12:12 EST 2010
Excellet! Thanks, Jim!
Randy
On Jan 15, 2010, at 11:06 AM, "Jim Brown" <jim at audiosystemsgroup.com>
wrote:
> On Fri, 15 Jan 2010 09:03:55 -0600, Randy Moore wrote:
>
>> Does anyone have the wiring for the CM500 to connect to the K2? Or
>> just the pin-out for the CM500 stereo connector?
>
> Connect the "tip" of the CM500 mic connector to the mic input pin of
> the
> K2, connect the "ring" of the CM500 mic connector to the +DC pin on
> the
> K2 mic connector through a resistor of about 5K (value not critical),
> and connect the "shell" of the CM500 mic connector to the shell of the
> K2 mic connector.
>
> Two ways to do this. For both you need to buy an 8-pin connector.
> Method
> 1) Cut the connector off the CM500, strip the wires and identify which
> color goes to which pin. Strip the wires from the headset and wire
> them
> to the 8-pin connector.
>
> Method 2) Don't cut any wires. Buy a female 1/8-inch jack from Full
> Compass (a very good pro audio vendor in Madison, WI) and make an
> adapter.
>
> http://www.fullcompass.com/product/339102.html
>
> You'll pay $1.30 for one connector and about $8 to ship it. :) That's
> silly, of course, but it's how life is. So instead of buying only one
> connector, think about other connectors you need and stock up. I did
> this about two weeks ago and bought ten each of four types of hard to
> find connectors.
>
> I strongly recommend method 2. You'll find that this mic and
> headphones
> work really well on a computer, and on the K3. For these uses, you
> need
> no adapter at all -- they plug straight in.
>
> Note that I haven't identified which pins on the K2 connector are
> which
> -- that depends on how you wired it when you built it, so check the
> K2
> manual and your build notes for that detail.
>
> 73,
>
> Jim Brown K9YC
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list