[Elecraft] K3: Heil HC-4

[Bill VanAlstyne W5WVO]

The low-gain setting will "work" with the Heil mic elements, but you will 
have to run your mic gain control up to about max, unless you typically 
scream into the microphone. As Tom says, either will work, but the HI 
setting works better.

In addition, if you intend to use VOX, the LO setting will not provide 
sufficient audio to operate the VOX effectively, in my experience. YMMV.

Bill W5WVO

--------------------------------------------------
From: "Tom Williams" <n2cu at roadrunner.com>
Sent: Thursday, January 14, 2010 4:42 AM
To: <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] K3: Heil HC-4

> Ruben,
>
> I gave you the setting I use (mic gain Low) with my HC-4 element. You can 
> use either gain setting and it will work.
>
> 73,
> Tom N2CU <><
> K3 #3582
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>