[Elecraft] K3 Assembly-p32 VFO B Encoder: Trim 5 pins???

[Richard Hill]

Hello.  I'm building K3 #3653 and hit a snag installing the second 
encoder, VFO B.  The instructions (page 32)  indicate I need to trim 5 
pins close to the PC board as part of the preparation to install the 
encoder.  I'm not seeing it.  Does this mean cutting the pins after 
installing the encoder?

I looked for an errata sheet for the assembly manual, but did not see one.

OK, what am I missing?

Thanks
Rich
NU6T