[Elecraft] [K2] K2 -- Audio output

[2rGarry]

Thanks for the suggestions guys.  I have come to the conclusion that the
audio is probably where it should be and that there is nothing amiss within
the audio circuitry.  I just installed the Ksb2 today and have that to play
with.  Listening with the ssb filters does make a fair difference in audio
sound compared with the cw filters.  I have to go through the manual a
couple more times and to perhaps repeat the alignment procedure as well
before I will get a good grasp on what is required.  I currently am getting
decent audio reports but not up to what my friends are used to hearing me
sound like on my Icom or Yaesu, but I suspect I will never get the radio to
that stage.  I do have a scope so maybe I can utilize it to best advantage
for setting up the audio and the filters.

Just wanted to pass along my thanks for the replies received to my question.

73

Garry




2rGarry wrote:
> 
> The speaker audio seems a trifle low on my K2.  With headphones it's good
> but I have to crank the volume control quite high to get decent audio
> output from the speaker.  I suspect that the audio is just as designed. Is
> that typically the case with the K2?  Or should I be looking for a
> problem?  As I said, with the headphones there is no issue whatsoever, I
> can feed audio to the headset and to the computer input (for psk) with no
> problem by just using the headphone jack and a splitter.
> 
> I'm wondering if I need to build an amplified speaker for monitoring
> without having to wear the headphones.
> 
> Thanks.
> 
> Garry -- K2 6849
> 

-- 
View this message in context: http://n2.nabble.com/K2-Audio-output-tp4287879p4303130.html
Sent from the [K2] mailing list archive at Nabble.com.