[Elecraft] [K3] IF output

[Sverre Holm (LA3ZA)]

If you have an oscilloscope you can connect it and see the output. I have a
K3 which has the modified IF with higher output. I have a 5 MHz (-3 dB)
oscilloscope in my shack for monitoring. Even at 8.215 MHz it indicates up
to +/- 50 mV in the 40 m band (no ATT, no PRE). In other bands it is lower,
like about +/- 5mV (no ATT, no PRE) in the 80 m band. Due to the bandwidth
limitation of my oscilloscope, I guess these values should be doubled or so
to find the true values.


srife wrote:
> 
> 	I am trying to verify the output at the IF OUT jack on the back of the
> K3. 
> 


-----
Sverre, LA3ZA

K2 #2198, K3 #3391
http://www.qslnet.de/member/la3za/K2/mod.html LA3ZA Unofficial Guide to K2
modifications 
-- 
View this message in context: http://n2.nabble.com/IF-output-tp4294395p4294893.html
Sent from the [K3] mailing list archive at Nabble.com.