[Elecraft] k2 + kpa100/kat100 Power problem

[DAVID Nachbaur]

Hello all I have  the K2 with the KPA100/KAT100 in an EC2 case and running that configuration. I get full power out of the unit on all bands but anything above the 10 watts is automatic 100 watts. there is now in between The display does show any setting that I want. for example I can dial up 50 watts. but it will be 100 watts or 30 watts  I still have 100 watts as I scale up throught the range of the power control. Any suggestions where I should start. I did check my cables and all seems to be ok I have it running through my logging program ok. So frequency and mode control are working ok.

Thanks

David KR4OW
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/196390707/direct/01/