[Elecraft] [K2] K2 -- Audio output

[Gregg R. Lengling]

Disable the AGC and see if the volume goes up quite a bit, if it does 
then the AGC voltage set point is not set proper, go thru that part of 
the alignment again.

Gregg, W9DHI


2rGarry wrote:
> The speaker audio seems a trifle low on my K2.  With headphones it's good but
> I have to crank the volume control quite high to get decent audio output
> from the speaker.  I suspect that the audio is just as designed. Is that
> typically the case with the K2?  Or should I be looking for a problem?  As I
> said, with the headphones there is no issue whatsoever, I can feed audio to
> the headset and to the computer input (for psk) with no problem by just
> using the headphone jack and a splitter.
>
> I'm wondering if I need to build an amplified speaker for monitoring without
> having to wear the headphones.
>
> Thanks.
>
> Garry -- K2 6849
>   


-- 
Gregg Lengling W9DHI
http://forums-ham.radio.ch Administrator