[Elecraft] N1MM RTTY & K3

[Mike]

Terry,
I just went through something similar. Make sure the MARK frequency in 
MMTTY (which N1MM uses) matches the mark frequency in the K3. In data 
mode, hold the PITCH button and you see mark and shift.

ALso make sure that MMTTY is set to use the soundcard (Options, Misc).

GL & 73,
Mike NF4L

terry burbidge wrote:
> Perhaps someone can please help. I previously set up N1MM to work RTTY via
> N1MM digital interface using LSB mode on my K3 - no problems there. The K3
> User Manual suggests using 'Data - AFSK A' mode for soundcard based RTTY
> which I have tried to do. In AFSK A mode on the K3, I can only key the radio
> via MVARI and not via the N1MM main window (F1-F12 macros). However, if I
> set the K3 to 'PSK - D' mode, it does work from the main window.
>
>  
>
>  
>
> Cheers,
>
>  
>
> Terry Burbidge
>
> G4MKP
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>