[Elecraft] k3 cw default bandwidth

[Don Wilhelm]

Gary,

The K3 remembers the filter settings per band and per mode.  Increase 
the DSP width and the filter selection will follow.  You may have to 
have an assistant to know that the right DSP filter control is set to 
WIDTH instead of HI CUT - tapping the button toggles between those two 
selections.

There is also the possibility that you could set the filter width using 
RS-232 commands sent to the K3, and that may be easier for you.  You can 
use K3 Utility or several other applications to accomplish that.  Look 
in the K3 Programmer's Reference for the commands to accomplish it that way.
Another possibility is to set a macro in the K3 so you will have a one 
button 'set filter width to 1 kHz' capability whenever you want it.  
Again the K3 Programmer's reference will give you the command and syntax 
needed.  K3 Utility can be used to store the macro in the K3.

73,
Don W3FPR

Gary Lee wrote:
> I have a 1K and 400 hz filter in my k3.  When changing to cw, it 
> automatically goes to 400 hz.
> Can this be set to start out at the 1k setting?  If so, please be specific 
> on how to do this.  I'll have to find someone to read the menu screens for 
> me.
>
> Thanks.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.725 / Virus Database: 270.14.129/2605 - Release Date: 01/07/10 02:35:00
>
>