[Elecraft] [K2] K2 80m Scratch RX audio

[DaveVK]

Hi Tom,

I sometimes get that on 40mx with my NB on in the presence of strong
broadcast stations.  If I turn the NB off all is well again.

I know this may not necessarily help your situation.  Is your distortion all
the time?

Dave


Tom Campie wrote:
> 
> Hey guys, I'm having a problem with my K2 and scratchy RX on receive
> audio.  The problem exists with or without headphones and at any volume. 
> I tried turning off AGC and it still was there and its on all strengths of
> signals (I have limited access to anything stronger than S3 or so due to
> antenna situation)  I am using a 66' doublet in the attic fed with 300 ohm
> twinlead through the Elecraft 4:1 balun into the KAT2.  I haven't noticed
> the noise on other bands, just 80m.  Any ideas as to what may be causing
> this noise?  I'll try to get a recording of it soon.  Stay posted.
> 
> TJ
> W0EA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

-- 
View this message in context: http://n2.nabble.com/K2-80m-Scratch-RX-audio-tp4264100p4269955.html
Sent from the [K2] mailing list archive at Nabble.com.