[Elecraft] New K3 User and New Ham

[Wes Stewart]

--- On Mon, 1/4/10, WILLIS COOKE <wrcooke at yahoo.com> wrote:
The K3 is more forgiving of slightly low voltage than most rigs.  It will operate pretty well down to 11.0 volts, but it operates better at 13.8 volts or so.  

Please don't do this to your ham neighbors.  Nominal 12V PAs already put out too much garbage in the form of IMD at nominal voltage.

Having the finest receiver in the world does no good when the band is cluttered with garbage signals.