[Elecraft] K3 DSP Rev D - some of the findings

[Bill W4ZV]

juergen piezo wrote:
> 
> Mark also found that there was less ringing on the Ten Tec Orion's narrow
> DSP filters. 
> 

Note that:

"The above (Orion) 200Hz and 100Hz DSP filter settings are 227Hz and 155Hz
in reality.

This is a key reason there is less ringing.  If I recall correctly, the DSP
50 (lowest setting) in the K3 is actually around 70-80 Hz, which is about
half of the Orion DSP 100 (lowest setting).

73,  Bill

-- 
View this message in context: http://n2.nabble.com/K3-DIY-DSP-Rev-D-please-elaborate-tp4238598p4241252.html
Sent from the Elecraft mailing list archive at Nabble.com.