[Elecraft] K3 - RTTY Question

[chen dave]

Hi Dick,
     Did you set the correct filter shift freqency in menu? I guess you use
2.7KHz SSB filter
during RTTY transmit.

73 de ba4rf,David

2010/3/1 <RLVZ at aol.com>

> This weekend I used my K-3 on RTTY for the first time.  Using the  K-3's
> AFSK-A mode along with N1MM & MMTTY.
>
> I quickly noticed that I was off frequency by differing amounts on  each
> band and seldom would anyone come back to me when I called them.   So I
> called
> CQ myself and waited for people to call me and then went tuning  to see
> what freq. they were on.  To tune callers in on  20-meters it usually
> required
> an RIT setting of +0.10 while on  40-meters they usually called in with RIT
> at -0.10 ... seemed to  be a little different on each band.
>
> Question: Is there a way prior to operating, to setup the  K-3 so the
> transmitted RTTY is on freq. on each  band?
>
> By the way, when I did get the K-3 on frequency is worked  greatll!
>
> Thanks & 73,
>
> Dick- K9OM
>
>