[Elecraft] k3 utility

[Hector Padron]

I also had found that if the K3 RS232 speed don't match the one set at the software,it will not connect,both have to be the same,I use 4800 on mine.
 
AD4C
 
 

"For a refined ham it is compulsory to own a k3"

--- On Sun, 2/28/10, Ken Nicely <ken at nicelyweb.com> wrote:


From: Ken Nicely <ken at nicelyweb.com>
Subject: Re: [Elecraft] k3 utility
To: elecraft at mailman.qth.net
Date: Sunday, February 28, 2010, 6:56 PM


This is just a guess, but the most likely scenario I can think of is that
the Software is getting a connection to a com port that is not the K3.
Maybe you could try disabling any other com ports through device manager
and then try to start the K3 utility.  If it is connecting to another com
port, once you open the utility and set it to the correct com port and have
it working you can enable the other com ports again and all should be fine.

Ken KE3C


>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html