[Elecraft] building a K2

[Don Wilhelm]

Jim,

Yes, there is a page in the manual where it tells you that you can 
install parts like the headers and standoffs for the options.  The only 
one that you should not pre-install is the K60XV, and the manual also 
tells you that.  Leave the jumpers for the options in place until you 
have the basic K2 up and running, then follow the installation 
instructions for each option.

If you were building your 10th K2, I might advise you differently, but 
for the first 10 - follow the manual instructions, things are less 
complicated that way.

73,
Don W3FPR

Jim Dunstan wrote:
> Hi,
>
> If I order a package including  K2, KPA100, KSB2, KNB2, and K160RX and 
> start to do the assembly I wonder if in the assembly process I will come to 
> certain stages where there will be a question whether a certain module is 
> going to be installed.  If yes, do this and if not do that.  I understand 
> that if certain modules are installed after basic assembly some back 
> tracking is required.
>   
>