[Elecraft] K2 / KAT100 40 meter oscillation problems

[John Grimm]

I recently added a KAT100 to my K2-100 and I'm having problems tuning at high-power only on 40 meters.  Symptoms are exactly as described under previous posts on the 40M oscillation issue.  My KPA-100 is Appendix G Rev-C prior to the KPA100 upgrade.  I have read some previous posts on this subject that simply moving RFC10 may cure the problem, but I'm not clear in which direction to try moving the component?  Or should I simply purchase the KPA100 Upgrade kit and make those changes?  Thank you for any feedback.  John / K0YQ
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/201469227/direct/01/