[Elecraft] K3/microKeyer II -- paddle Tx with power, mK II TX no power

[Don Wilhelm]

Rich,

Try a quick test - plug the paddles into the KEY jack and close the dot 
contacts on the paddles.  If the K3 transmits, then the KEY jack is 
operating properly - look at your WinKeyer for the solution to your 
problem (it is not providing a sufficiently low resistance for keying).

73,
Don W3FPR

Richard Hill wrote:
> I've replaced my 746 with a K3.  Using a microKeyer II between the radio and computer, and it played well with the 746.  When I test the winKeyer from the mHam router, I see CW and PTT1 light on the mK II and see TX light on the K3, but --no-- power out.  If I key the rig via paddles, I see TX light on the K3 and see power out on the SWR meter.
>
> I'm guessing I have missed a K3 config setting, but have not found it over the weekend.  Can someone point me in the right direction?  Thanks.
>   
>