[Elecraft] K3 on RTTY FSK

[Don Wilhelm]

Claude,

The mode (as well as the separate Data Mode) are 'per band' settings.  
Have you assured yourself that the mode was set to DATA on each band and 
the Data Mode (hold DATA MD button) was set to FSK D - I assume that is 
what you are using from your statement - you must use the ACC connector 
input pin for FSK, if you are using soundcard generated RTTY, then 
select AFSK and check that the mark frequency in your software is the 
same as the setting on the K3.

73,
Don W3FPR

Claude Du Berger wrote:
> Hello Group
> I am a new owner of a K3.
> I was testing RTTY FSK before WPX and found
> that it will only transmit on 10, 20 and 80m.
> On other bands only have the red led...
> Is there anything I should program?
>
> Thanks
> Claude VE2FK
>   
>