[Elecraft] K2 - K2PAKIT install?

[Don Wilhelm]

Ross,

You have a replacement resistor for R50 included in the K2PAKIT - 
sometimes it is open, so it would be wise to check - measure the 
resistanc between the emitter of Q6 and ground - if it is other than 1.5 
ohms, replace R50.

73,
Don W3FPR

Ross Primrose wrote:
> OK, so I lost the finals on my K2 (no output, 90ohms both collectors to 
> ground, even with the heatsink removed). Ordered the K2PAKIT, came with 
> the two finals, the 2 2N2222As for the bias circuit, and an unidentified 
> resistor or choke that I don't know what to do with. No instructions...
>
> Any help appreciated...
>
> 73, Ross N4RP K2 #0219.
>
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.733 / Virus Database: 271.1.1/2681 - Release Date: 02/11/10 02:35:00
>
>