[Elecraft] K2: DSP tutorial - or other references

[dw]

Have you looked at the "The Nifty Mini-Manual"?
It has 3 pages on the DSP settings.
I find it really easy to follow.
The people who sell these are wonderful people.


In the following "Hold" means hold the button(s) for a count of 3
seconds

My most common Non-configuration adjustments during normal rig usage:
- Transitioning through the filters = Hold XFIL
- Turn Noise Reduction ON/OFF = HOLD XFIL + MSG together



Filter and Noise Configuration adjustments:

>From the main frequency readout
- Quick_tap DISPLAY
- Hold BAND+ to cycle through settings

When you are cycling through these settings and you get to the [dSP On]
display
- Quick-tap BAND- will turn DSP OFF
When DSP is OFF it will look like [dSP bYP]
With [dSP bYP] is displayed HOLD BAND+ to turn DSP ON.
NOTE: The display will not change after you release the hold button but
the DSP is back on.
To verify quick-tap BAND+

The filter settings are fairly straight forward.
Its the noise reduction adjustments that one might find the most
confusing.

I use a 750Hz side-tone so my filter settings:
The period after the C indicates D-noiser is ON
C.1 = .75 .80
C.2 = .75 .40
C.3 = .75 .20
C.4 = .75 .05


With the Configuration display as [C1 nr], [C2 nr], [C3 nr] or [C4 nr]
- Quick_tap BAND+ to cycle through Noise Reduction Levels
- Quick_tap BAND- to cycle between "Standard" cw filter and "Soft" cw
filtering

I prefer "Standard" cw filtering instead of the "Soft" cw filtering
I have my Noise Reduction settings at [nr .99 .10]

When your playing with the noise reduction settings you will get your
most pronounced change when transitioning from 99 to 00 on either the
Aggressive value or the Hold-time value.

N1BBR























































































































































































































































































































































































































































































































































 
-- 
 Bw_dw at fastmail.net