[Elecraft] need more power for x-verter

[Don Wilhelm]

Werner,

That higher level is not available from the KXV3, but 0 dBm  (1 mW) is 
available.
I am wondering why you do not plug the XV432 for the -20 to 0 dBm range 
and operate with the KXV3.  You must have reasons other than the K3 for 
making your choice of input power.
The only reason I can think of is that you are also using another 
(non-Elecraft) transceiver as an IF in addition to the K3.
If you are using isolated input/output lines on another other IF 
transceiver, put a 24 dB attenuator in the transmit IF input to drop the 
250 mW level down to 0 dBm.

73,
Don W3FPR

Werner Hasemann wrote:
> Hello,
> I would like to run my XV432 transverter with 100 to 250 mW from the K3 with the transverter-option. Did not find a solution in the handbook. Any good ideas ?
> Thanks Werner DJ9KH
>   
>