[Elecraft] Programming language and tools used by Elecraft and other for PIC programming - OT

[Matt Zilmer]

I've done lots and lots of C for the 18F PIC series.   The MPLAB IDE
that PIC sells works well with the ICD3 programmer / debugger.

I think the K3 MCU firmware is in C and probably some ASM, but not
sure on the DSP.

73,
matt W6NIA

On Sun, 07 Feb 2010 14:09:11 -0500, you wrote:

>This is a little off topic as it is not something that might be of great
>interest to some owners of Elecraft equipment unless they are into software
>as I am.  This reflector seems to be pretty knowledgeable and much more
>technical than most, so I am posting this to the reflector as there might be
>a few others here that would find it of interest.
>
>Recently I have started learning how to program PIC controllers, partly
>because I am interested and curious about how it is done and partly because
>I would like to start building some of my own software controlled radio
>electronics.  I am wondering what language Elecraft uses for programming
>their radios and what software package they use.  I am leaning towards using
>C in my projects using the Microchip compilers, but I have also looked into
>the Swordfish basic compiler and the mickoBasic Pro compiler as I know
>Visual Basic.net very well.
>
>I would also be interested in knowing if there are others on the list that
>have done some PIC programming and what language and software they use or
>would recommend.
>
>Ken Nicely KE3C
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html