[Elecraft] AGC and DNR

[Hector Padron]

Dave you are not an ignorant because now that you mentioned it,my K3 behaves the same way, it look like DSP NR works in conjunction with the AGC so when you disengage it then NR will not work at all and the "N/A" (not aplicable) sign shows at the display,anyway I never use the radio without the AGC,for me it works better that way,but maybe this is another issue that Elecraft should fix.
 
AD4C
 


"For a refined ham it is compulsory to own a k3"

--- On Sun, 2/7/10, David Y. <w7aqk at cox.net> wrote:


From: David Y. <w7aqk at cox.net>
Subject: [Elecraft] AGC and DNR
To: elecraft at mailman.qth.net
Date: Sunday, February 7, 2010, 2:46 PM


Hi All,

This has probably been discussed, and I obviously missed it.  It's probably 
in the manual somewhere too.  Since I have not previously been one to turn 
my AGC off, I just wasn't aware of it.  Now I find that if I turn my AGC 
off, my DNR will not engage--I get a big "N/A".  So, this is normal?  You 
must have the AGC on to use DNR?  I apologize in advance for my ignorance on 
this matter.

Dave W7AQK


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html