[Elecraft] K3 #4951

[Don Wilhelm]

  Jetti,

It would seem that you are having a multitude of strange behaviors.  The 
usual thing to try is an EEINIT, but before doing that, try to use K3 
Utility to save your parameters (or better yet, have a prior 
configuration save done before the problems surfaced).  Try an EEINIT 
and restore your parameters from a known good working set if possible - 
if you do not have a good set of saved parameters, you may have to 
restore all your settings manually.

Things do not "go to hell in a handbasket" with multiple symptoms unless 
the data tables get scrambled, and it sounds like you have multiple 
problems there.

73,
Don W3FPR

On 12/31/2010 8:34 PM, Jettie Hill wrote:
> HI SIG on readout.  Blocks the RX.  Sub RX seems to be OK, but things are going worse.
>
> Can't access Config or Menu
> No transmit output
> Frequency readout reverses while tuning
> Most button take 5 seconds after release
> Sub RX seems to work, except no frequency display
>
> Any ideas??
>
> Jettie B. Hill, W6RFF
> Roseville, CA 95661-5008
> 916-783-0383
> American Radio Relay League (ARRL)
> Since 1938.    K3 #4951
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>