[Elecraft] K3 & DM 780

[goldtr8 at charter.net]

I have tried DATA-A, CW, USB,  in other words I have tried them all.

I have tried different settings for mike input for rear line in and 
everything that everyone has suggested.

It just does not work.  I am sure it is something simple, but I cant 
find it.

Don
KD8NNU


On Fri, Dec 31, 2010 at 5:21 PM, k2qi.nyc at gmail.com wrote:

> Do you have the K3 set to DATA-A mode?
>
> James K2QI
> ------Original Message------
> From: goldtr8 at charter.net
> Sender: elecraft-bounces at mailman.qth.net
> To: Elecraft Reflector
> Subject: [Elecraft] K3 & DM 780
> Sent: Dec 31, 2010 16:27
>
> I want to use DM 780 with my K3 to work either CW or one of the data 
> modes.
>
> I can get the DM 780 to decode signals, but if I try to TX, I am 
> unable to trigger the radio to do anything.
>
> I have both a USB to serial connection, plus the sound card from the 
> laptop connected.  I have been reading the manual and a starter guide 
> someone sent me, but I am getting nowhere fast.  I did try different 
> settings for the PPT--KEY under the config menu, and I did get a solid 
> tone out of the monitor speakers but no TX.
>
> If someone can point me to a resource on the intranet, I will glady do 
> some more reading.
>
> Thx  Happy New Year
> Don
> KD8NNU
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> Sent via BlackBerry from T-Mobile