[Elecraft] spectrogram

[Tom Hammond]

John:

There are several(!) versions of Spectrogram available.

IF you are planning on using Spectrogram to align your K2 or K1, then 
I'd suggest getting Spectrogram v5.1.7 from my web site... it's 
located immediately adjacent to the printed documentation for 
aligning your radio (K2 or K1), depending upon which rig-specific 
page you've gone to.

You CAN use newer versions of Spectrogram with my alignment docs, but 
there's absolutely NO benefit in doing so and newer versions offer 
features you will not need nor wish to use.

Visit:

    For the K2 - http://www.n0ss.net/index_k2.html

      Spectrogram and docs are located about 3/4 of the way down the page

    For the K1 - http://www.n0ss.net/index_k1.html

      Spectrogram and docs are located about 2/3 of the way down the page

The ONLY additional device you'll need is an audio jumper cable from 
the radio;s
speaker output to the input of the sound card on your PC.  Suggest 
using stereo
connectors, but with TIP and SLEEVE (no RING) connected.

DO NOT OVERDRIVE THE AUDIO INPUT TO THE SOUND CARD.. this will cause audio
artifacts in the display which are not helpful during the alignment process.

If you have ANY PROBLEMS OR QUESTIONS, drop me an e-mail.

73,

Tom Hammond   N0SS

At 09:47 12/29/2010, you wrote:
>where can i find this software?  tried googling it but apparently 
>the company that made it went out of buiseness.
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html