[Elecraft] K3 mod history?

[Dick Dievendorff]

The mod requires removal of just the front half of the bottom cover, so it is about as easy as could be for a SMT part replacement. 

73 de Dick, K6KR

On Dec 28, 2010, at 1:41, "Julian, G4ILO" <julian.g4ilo at gmail.com> wrote:

> 
> 
> Dick Dievendorff wrote:
>> 
>> There is a single resistor mod on the RF board for greater IF gain for the
>> P3. No mod to the KXV3 or KXV3A, but the P3 does use the IF out connector,
>> so one of the KXV3 or KXV3A is used.
>> 
> Ah, that was probably the one I was thinking about. As it affected the IF
> output I probably assumed it was on the KXV3. Pity I don't have the required
> value of 1/8W resistor handy or I could have done the mod at the same time
> as I added the jack for powering the KXV144.
> 
> -----
> Julian, G4ILO. K2 #392  K3 #222.
> * G4ILO's Shack - http://www.g4ilo.com
> * KComm - http://www.g4ilo.com/kcomm.html
> * KTune - http://www.g4ilo.com/ktune.html
> 
> -- 
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-mod-history-tp5869008p5871414.html
> Sent from the [K3] mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html