[Elecraft] Reason to NOT buy a K3?

Sun Dec 26 15:31:30 EST 2010

Gary,

Seem like most of the important points have been covered except perhaps one:  the P3.  The use of the P3 with the second receiver in split operation (contest or DX) is simply awesome!  You might want to play with one before you decide.  For example, with the second receiver and the P3, you can see the passbands of both receivers (different colors).  This makes it simple and fun to "see" where the other stations are in a pileup and also see the "holes" in real time.  Kind of like shooting fish in a barrel.  As far as I know, Yaesu has nothing like the P3 but you have to actually see and use one to be fully convinced.

I suspect we will welcome you to the K3 users "club" very soon.

73 de W6BK

On Dec 26, 2010, at 11:10 AM, Gary K9GS wrote:

> Hello all and Happy Holidays!
> 
> I've been reading the K3 reflector for the past couple of weeks.  I'm in 
> the market for a new radio and have my choices narrowed down to a couple 
> models to replace my TS-850S which has served me very well.
> 
> First my operating interests:
> 
> I primarily spend my time contesting, DX contests in particular, and 
> most of my time on 80 and 40M.  99% of the time I operate CW.  So, in 
> particular, low band CW performance is important to me.  In between 
> contests I spend my time DXing, again primarily on the low bands.  Some 
> occasional VHF operating on 6 and 2M.
> 
> I'd also like to point out that I do interface my radios to a dedicated 
> computer using Win XP pro and use N1MM for contesting and Logger 32 for 
> general operating.  Both of these applications are very well supported 
> and the K3 is well represented among users.
> 
> I've narrowed my choices down to two radios, the FTDX5000 and the K3.  
> There are several things keeping me from falling in love with the FTDX5000:
> 
> 1)  The CW break-in performance is broken in the FTDX5K above ~30 wpm, 
> resulting in chopped characters, and from what I'm told, really bad 
> sounding on the air.
> 2)  The APF filter is also not working correctly.
> 3)  The contour control does not function on CW, I believe only on SSB.
> 
> Of course, these limitations COULD be fixed by Yaesu in future revisions 
> but I'm apprehensive that Yaesu is going to fix anything.  They 
> certainly don't participate in the FTDX5000 user forums although 
> supposedly they do read the posts.  Sort of the "we know what we're 
> doing, there's no problem" attitude with JA radio manufacturers.  After 
> all, how many FT-1000XX radios were built with the key click problem?  I 
> don't think Yaesu ever admitted there was an issue and the fix was 
> relatively simple to implement in production.
> 
> At $5K plus one would hope these problems are addressed but one never 
> knows.  Certainly Elecraft is much more responsive and is actively 
> involved in post sale issues and solutions.
> 
> I've never been a fan of ICOM HF radios although the IC-7800 gets good 
> reviews but at $10K per radio???  I've also used Ten-Tec before and 
> never been a big fan plus the Orion II suffers from a poor performing 
> 2nd receiver and I know of several locals that have had there Orions 
> back for service/updates several times.  So what else is there and am I 
> missing anything else?
> 
> Which brings me to the K3.  This radio seems, to me, to be exactly what 
> I'm looking for.  I really can't think of anything holding me back.
> 
> I'm looking at the 100W model with the following accessories:
> 
> a)  KAT3
> b) KXV3A
> c) 2.8K 8 pole SSB filter
> d) 400 hz 8 pole filter
> e) 250 hz 8 pole filter
> 
> Future options would be the KRX sub receiver, K144XV-K 2M Module (I do 
> some VHF operating but presently have a rig for 2M SSB anyway),   I'm 
> not currently using any receive antennas on 80/40M.  I'd like an opinion 
> on this but I don't think I see the advantage to buying the sub receiver 
> UNTIL I have receive antennas available for diversity reception?  What 
> am I missing here?
> 
> I don't operate any of the digital modes but I would like to do so.  Is 
> the 2.8K filter adequate for digital modes or do I want something different?
> 
> I also like the portability of the K3 as I am planning on some future 
> DX-pedition use.  I can't see lugging a 43 pound FTDX5000 through 
> airport security either.
> 
> Sorry for the long post but I wanted to have a sanity check with some 
> experienced K3 users that know the K3 and have similar interests and 
> requirements.  I'm on vacation this week and one thing I do plan on 
> doing is dropping by a local in or DX club and using his K3 for a couple 
> of hours.
> 
> Your thoughts and comments are appreciated.
> 
> -- 
> 
> 
> 73,
> 
> Gary K9GS
> 
> Check out K9NS on the web:  http://www.k9ns.com
> Greater Milwaukee DX Association: http://www.gmdxa.org
> Society of Midwest Contesters: http://www.w9smc.com
> 
> ************************************************
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html