[Elecraft] Memory Channel Puzzle

Allen Griffith n5ag at verizon.net
Mon Dec 20 00:14:29 EST 2010


Hello,
When selecting memory #2 (3.922) from a higher Memory numbers, #3 (3.930), #4 
(3.941), #5 (3.963), #6 (3.916), #7 (1.900), #8 (7.290), etc, etc, RELAYS can be 
heard as the VFO knob is turned counter clockwise and correct frequencies are 
displayed with TX/RX functions operating normally.  When Memory #3 (3.930) shows 
up, the RELAY functions and all is normal, ie TX/RX. Then as I continue to 
select Memory # 2 (3.922), no RELAY is heard and the frequency displays 
correctly but there is no TX/RX.  Then continuing to Memory #1 (3.825), a RELAY 
functions, TX/RX is normal.  Switching back to Memory #2 the RELAY functions, 
TX/RX is normal and all is well.

Any one experience this anomaly?  I do not recall it being that way with the 
previous 

Firmware  MCU 4.14 / DSP 2.60 / FPF 1.13, October 6, 2010.   I have 4.22 
Firmware loaded now.


Thanks

Griff....N5AG  
 
I know some things about a few things and I know little about a lot of things!!


More information about the Elecraft mailing list