[Elecraft] [K2] Ground connection?

[Robert G. Strickland]

Brian...

The hole is threaded to accept a corresponding bolt with an enlarged end 
for finger tightening. The idea is for the threaded bolt to hold a 
ground wire/strap to the K2. I found this arrangement difficult to use 
in my particular setup. So, I inserted a bolt from the inside out and 
then used a wing nut on the outside to hold my grounding strap. This has 
worked for me. YMMV.

...robert


On 12/19/2010 04:29, Brian Denley wrote:
> There is a hole in the back of my K2 marked 'GND'.  Looking for a suitable
> ground connection to my K2 I wondered if this 'hole' gets filled by an
> option.  What are other users using for a K2 ground connection?
>
> Brian Denley
> KB1VBF
> http://home.comcast.net/~b.denley/index.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
Robert G. Strickland, PhD, ABPH - KE2WY
rcrgs at verizon.net
Syracuse, New York, USA