[Elecraft] K2 Power Supply

[John Ragle]

I used a K2 for about a year on a 25 amp Radio Shack Switching Power 
Supply. I am now using the same supply on an ICOM 910H. There is an 
enormous to-and-fro on this reflector about the merits/difficulties of 
switching supplies which I do not want to breathe back into existence, 
but I have never had any problems with this set-up or with the Pyramid 
switcher I use on my K3. These power supplies are small and very 
convenient. I use a brutish Astron 70 for my TE Systems amps...it keeps 
the shack from sailing away in a high wind.

John Ragle -- W1ZI

=====

On 12/14/2010 10:07 AM, Paul Agoglia wrote:
> I am in the process of assembly of a K2, working on the Front Panel Board.  As I move closer to the testing stage (probably another month or so) I am starting to think about how the unit is powered.  I am guessing that there is not an internal power supply.  I also did not order the battery option.  What suggestions are out there for powering the K2?  By the way, I do have the 100 watt option, in case that plays a role in choosing a power supply.
>
> I am willing to consider kit power supplies, so any suggestions for pre built and kits are welcome.
>
> 73 de WN2K
> Paul Agoglia
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>