[Elecraft] Winmor and K3

[Jim Brown]

On 12/13/2010 12:49 PM, Andrew Meyer wrote:
> My main reason for this email to the reflector, is for help on the cable
> types and connections and/or an article that explains the setup and
> configuration that works.  I had considered using a Signal Link but is there
> really any reason to do so?

Plain ordinary cabling of good quality is all you need, provided that 
you do the simple bonding from chassis to chassis of all interconnected 
equipment described in my tutorial on Interfacing ham gear to 
computers.  While my material is written for SSB, RTTY, and PSK with an 
emphasis on contesting, all the principles apply 100% to your application.

See http://audiosystemsgroup.com/HamInterfacing.pdf   for a Power Point 
that I've used for several presentations at clubs and hamfests, and

http://audiosystemsgroup.com/RFI-Ham.pdf  for the same material in text 
form.  It's in the chapter on "Solving Problems In the Shack."

73, Jim K9YC